Verizon Wireless Intelligent Mobile Hotspot MiFi 2200 - Manual (Page 57)

56
IMPORTANT Please note: “Data Received” and “Data Transmitted” as seen on this Diagnostics
page are not representative of actual billable data usage when data is transmitted or received
on the Verizon Wireless Network. Due to different network protocol overheads and protocol
conversions, the data transmitted on the Verizon Wireless Network differs from what is observed
on the device. Please see the Usage tab in VZAccess Manager during USB mode to view the
estimated data usage for your current billing cycle.
Additionally, when using MiFi in WiFi mode, you do not get usage alerts when connecting or be
able to track your usage with the Usage button in VZAccess Manager. Please periodically connect
in USB mode using VZAccess Manager to track your unbilled usage for the current billing cycle.
Buttons
• Modem Status — [See System Status
(page 55).
]
• System Log — [See System Status
(page 55).
]
• Restart Counters — [See Global Traffic Counters
(page 55).
]
• Connection Log — [See Global Traffic Counters
(page 55).
]
• Restart — Restart MiFi 2200. All Internet connections, and all WiFi connections, are lost
during the restart.
• Reset to Factory Defaults — This button resets all Access Point and Router settings to their
factory default values. All existing settings are lost.
WARNING! The “Reset to Factory Defaults” operation overwrites ALL existing settings. If
the WiFi settings change, you will lose this connection, and need to reconnect using the new
settings. [See
How do I reset the Access Point and Router settings back to factory settings? (page
63). ]