Verizon Wireless Intelligent Mobile Hotspot MiFi 2200 User Manual
Page 47
46
When the feature is disabled (un-checked), any device with the correct network name (SSID) and
network key (WiFi passkey) can connect to the MiFi 2200 wireless network.
Find the MAC Address on a Computer
The Media Access Controller (MAC) Address is also known as a hardware or physical address for a
device (usually a network adapter). It consists of six pairs of numbers and letters (for example,
00-21-9B-1C-64-34).
You can view the MAC address for any device connected to the MiFi wireless network from the WiFi
screen. [See
Tip!
You can cut and paste your computer’s MAC address from the WiFi Clients section of the WiFi screen.
If the computer is not connected to the MiFi wireless network, you can find the MAC address
directly.
• On a Windows PC, the MAC address is the Physical Address. You can find the Physical Address
by running ipconfig /all from the cmd window.
» To run ipconfig/all, select Start > All Programs (or Programs) > Accessories > Command Prompt to open
the Command Prompt window. Then type ipconfig/all and press the Return or Enter key.
• On a Mac, the MAC address is the AirPort ID.
» To find the AirPort ID, open the Apple () Menu > System Preferences > Network. In the list, click
AirPort. Click Advanced. A sheet opens. Click the AirPort tab. The AirPort ID is at the bottom of the sheet.
IMPORTANT
Windows only: Make sure you get the MAC address for the wireless network
adapter and not the Ethernet controller (NIC), if the computer has both.
Add a Device to the Trusted Client List
To add a device to the Trusted Client List, follow these steps.
➊
➊
Type the WiFi-enabled device’s MAC address in the Add Trusted Client MAC Address field. You can
use either “:” or “-” as the separator (for example, 00:21:9B:1C:64:34 or 00-21-9B-1C-64-34).
Tip!
You can cut and paste your computer’s MAC address from the WiFi Clients section of the WiFi screen.
➊
➋
Click Add Client.
➊
➌
Repeat steps 1 and 2 as needed.
➊
➍
When the list is complete, click Apply.
Remove a Device from the Trusted Client List
To remove a device from the Trusted Client List, follow these steps.
➊
➊
Click on the device in the Trusted Client List to select it.
➊
➋
Click Delete.