Volvo V70R - Manual (Page 82)

81
Interior
Front seats
Preparations
The seats can be adjusted for a certain time
after unlocking the door with the remote
control without the key being inserted into the
ignition switch. The seats can always be set
when the ignition is on.
Power seat (option)
1. Front edge of seat cushion up/down
2. Seat forward/rearward
3. Seat up/down
4. Backrest rake
Overload protection is deployed if any seat
is blocked. If this occurs, switch off the
ignition and wait a short time before
operating the seat again. Only one of the
seat’s motors can be used at a time.
Buttons for memory functions
Seat with memory function
(option)
Store setting
– Adjust seat.
– Press and hold button
MEM while
pressing button 1 , 2 or 3 simultaneously.
Using a stored setting
Press one of the memory buttons
1 – 3 until
the seat stops. If you release the button then
the movement of the seat will stop.
Key memory in remote control key
The driver’s seat positions are stored in the
key memory when the car has been locked
with the remote control key. When the car is
unlocked with the same remote control key
the driver’s seat and rearview mirrors adopt
the stored positions when the driver’s door is
opened.
NOTE!
The key memory is independent of the
seat memory.
Emergency stop
If the seat accidentally begins to move, press
one of the buttons to stop the function.
WARNING!
Risk of crushing. Make sure that children
do not play with the controls.
Check that there are no objects in front of,
behind or under the seat during
adjustment.
Ensure that none of the rear seat
passengers can be trapped.