Verizon MI424WR - Manual (Page 11)

6
Wireless Broadband Router User Manual
Rear Panel
The rear panel of the Router features eight ports (Coax, Power, LAN Ethernet [ 4 ],
WAN Ethernet, and USB ), a Power switch, aReset button, and a wireless antenna.
Coax Port
The Coax port connects the Router to the
ISP or other devices using a
coaxial cable.
Power Port
The Power port connects the Router to an electrical wall outlet via the
Power cord.
Power Switch
The Power switch powers the Router on and off.
Reset Button
To restore the Router’s factory default settings, press and hold the Reset button
for approximately ten seconds. The reset process will start about
ten seconds
after releasing the button. When the Router resets, all the lights on the front
panel turn off, and then some of the lights start flashing. The Router has com-
pleted its reset process when the Power light glows steadily green.
" Caution: Do not unplug the Power cord from the Router dur-
ing the reset process. Doing so may result in the loss of the
Router’s configuration information. If this occurs, reset the
Router again.