Verizon MI424WR - Manual (Page 151)

146
Wireless Broadband Router User Manual
2. After choosing the traffic direction and the device on which to set the rule, click
Add in the appropriate row. The “Add Traffic Priority Rule” screen appears.
Set the following parameters:
Source Address - The source address of the packets sent to or received from the
network object. To add an address:
1. Select User Defined from the drop-down list. The screen refreshes and an
“Add” link appears.
2. Click Add, then add a new network object (see the “Advanced Settings”
chapter to learn how to add a network object). Clicking Add is the same as
clicking “New Entry” in the “Network Objects” screen.
Destination Address - The destination address of the packets sent to or
received from the network object. This address can be configured in the same
manner as the source address.
Protocol - Choose a specific traffic protocol from the drop-down list, or add a
new one. To add a new traffic protocol:
1. Select Specify Address from the drop-down list. The screen refreshes and
an “Add” link appears.