Verizon MI424WR - Manual (Page 145)

140
Wireless Broadband Router User Manual
LAN Connection Failure
s LAN connections are correct,
and the power is on.
s
unsure, let the computer get the IP address automatically by initiating the
DHCP function, then verify the computer is using an IP address within the
default range ( 192.168.1.2 through 198.168.1.254 ). If the computer is not
using an IP address within the range, it will not connect to the Router.
s 255.255.255.0 .
Time out error occurs when entering a URL or IP Address
s
s IP settings are correct.
s
s
I’ve run out of Ethernet ports on my Router. How do I add more computers?
Plugging in an Ethernet hub or switch expands the number of ports on the
Router. Run a standard Ethernet cable from the “Uplink” port of the new hub or
switch to a yellow Ethernet port on the Router.
How do I change the password on the Router’s Graphic User Interface?
From the Router’s
GUI Home screen, click Advanced, then Users. From the
“Users” screen, click Administrator, which generates the “User Settings” screen.
In the “General” section of the screen, change the password.
Is the wireless option on by default on the Router?
Yes. The Router’s wireless option is activated out of the box.
Is the wireless security on by default when the wireless option is activated?
Yes, with a unique 64-bit
WEP (Wired Equivalent Privacy) key.
Which connection speeds does the Router support?
The Ethernet Internet connection supports 100 Mbps. The 802.11g wireless con-
nection supports up to 54 Mbps (depending on signal quality, etc.). The
M o CA
connection supports 270 Mbps.