Wdp reader setup, 1 chapter 2 – Worth Data P11/12 User Manual

Page 7

Advertising
background image

2-1

Chapter 2

WDP Reader Setup

Configuring the WDP Reader for your computer
and application...

Turn on your computer: You should hear three beeps -- an
indication the WDP Reader is functioning correctly.

Find the laminated Reader Setup Menu sheet and look it
over. (For bar code slot scanners, the Reader Setup Menu
is a deck of bar coded cards.) This simple menu lets you
easily configure the WDP Reader to work with almost any
computer system, and tailor its bar code reading and data
format characteristics precisely to your needs. To scan
Reader Setup Menu bar codes and configure your reader,

you must know the right way to scan bar codes. If you are new to scanning, be sure
to read Appendix K - Scanning Instruction.

These are the WDP Reader's default settings. The WDP Reader is shipped
configured to these settings, and can be reset to them at any time by reading the
Start Setup and Reset bar codes on the Reader Setup Menu. If you need to change
any settings, or want to learn more about the WDP Reader options, the next pages
explain, step by step, how to set them and what they do.

WDP Reader Setup Menu

Code 39

Code 39 enabled

MSI/Plessey

MSI/Plessey disabled

Check Digit disabled

Check Digits not transmitted

Start/Stop characters not transmitted

Label Code 4/5 disabled

Accumulate Mode enabled

Caps Lock OFF

2 of 5

I 2of 5 disabled

Code 128

Code 128 disabled

6 digit code length

UCC-128/EAN disabled

Check digit disabled

UPC/EAN

UPC/EAN enabled

Code 93

Code 93 disabled

UPC Supplements disabled

Full ASCII estension disabled

UPC-E compressed, NSC of 0

Transmit UPC-A in UPC-A format

ISBN conversion disabled

UPC-A NSC and EAN-13 first two characters and check digits transmitted

UPC-E NSC and EAN-8 first two characters and check digits not transmitted

General

Configuration

AT with USA keyboard

Settings

Data Transmission timing NONE

NO preamble or postamble set

CR as Terminator Character

Medium pitch beep tone

No MagStripe slot scanner attached

Parameter

Default Setting

Parameter

Default Setting

Advertising