Whistler GPS - Manual (Page 28)

Main Menu Items
Even if you’re not an experienced GPS user, the step-by-
step procedures for the main menu items are easy
to follow. The main menu consists of the following:
Waypoints, Routes, Track Logs, Cold Start (page 15),
About, Change Datum, and Loading. Each menu item has
its own sub menu items (except About and Cold Start). The
main menu can be accessed from any navigation page.
Waypoints
As discussed in the Map Page section, the Galileo
™ can
store up to 500 waypoints. Waypoints can be entered in
two ways:
Method 1
1. While on the Map Page, move the pointer to a POI or a road, etc.
2. Simply press and hold the OK Button until the waypoint
screen is shown. See 26-C.
Method 2
1. Select “Waypoints” from the main menu. See 26-A. This brings
up the waypoint selection screen.
2. Press the Menu Button and select “New”. The waypoint screen
will be displayed. See 26-B.
Note: Method 1 is the easiest way to enter a waypoint. Method 2,
which can be used from any navigation page, is the best way if
you have the longitude and latitude of a known location.
Enter New Waypoint Coordinates (Longitude / Latitude)
1. Move the Direction Button to highlight the navigation
field, press the OK Button
2. The first character is highlighted. Move the Direction
Button up or down to select a different letter or number.
3. Move the Direction Button right or left to move to the
next area.
4. Continue above procedure for all coordinates.
5. Press the OK Button to enter the changes for this field.
6. Move the Direction Button to the “Check” box to save changes
and go back to the waypoint selection page.
Naming and grouping waypoints is discussed on page 21. An * next to
a waypoint indicates that it is also saved as part of a Route.
Main Menu
Items
GALILEO ™ GPS
26
Main Menu Items
26-A
26-B
26-C