Whistler GPS - Manual (Page 30)

Turn a Route On or Off
1. Select “Routes” from the main menu.
2. Select a route and press the Menu Button. If only one
route is listed, it is automatically selected.
3. Select “Set Navi” to begin or “Cancel Navi” to stop. An
“*” next to a route name indicates that that route’s
navigation is turned on. See 27-B.
Insert a New Waypoint into a Route
Note: Must turn route navigation off before a route can be edited.
1. Select “Routes” from the main menu.
2. Select a route and press the Menu Button. If only one route is
listed, it is automatically selected.
3. Select “Edit” and the routes name screen is shown.
4. Select the waypoint field and press the OK Button.
5. Select a waypoint that the new waypoint will be located in front
of and press Menu.
Note:
If the waypoint field remains highlighted the new
waypoint is inserted last.
6. Select “Insert WP” and select new waypoint and press the OK
Button.
7. Press the OK Button again to highlight the waypoint field and
select the “Check” box.
8. Press the PAGE/ESC Button to exit the routes name screen.
Delete All or One Waypoint from a Route
1. Select “Routes” from the main menu.
2. Select a route and press the Menu Button.
3. Select “Edit”.
Note: Must turn route navigation off to delete waypoints.
4. Highlight the waypoint field and press the OK Button
5. Select waypoint to delete and press Menu.
6. Select “Delete WP”. An “Are you sure?” message screen is
displayed. Press the OK Button to delete.
7. Press Menu to add or delete a waypoint or press the OK Button
and highlight the “Check” box to exit edit page.
Turn A Route
On or Off
Insert A New
Waypoint
Into A Route
Delete All
Or One
Waypoint
From A Route
GALILEO ™ GPS
28
Routes