Wizcom Quicktionary 2 - Manual (Page 14)

The Quicktionary
14
Multiple Characters Mode
This symbol indicates that you can enter as many characters
as you wish. Scroll to the character you wish to add and
press ENT. Keep adding characters in this way. To exit the
Character Bar press ESC. Scroll to this symbol and press
ENT to change to Single Characters Mode.
Single Character Mode
This symbol indicates that you can insert one character
before the Character Bar exits. Scroll to this symbol and
press ENT to change to Multiple Characters Mode.
The Opticard
The Opticard is a scanning keyboard found on the back of
the Pen case.
Every letter scanned with the Opticard is identified by its
unique barcode and converted to the correct character on
your Pen.
Use the Opticard to edit scanned text, or to insert text that
cannot be scanned due to scanning limitations.
To use the Opticard:
1. Hold the Pen case horizontally, with the Opticard
facing up and the Opticard title on the right.
2. Scan the Opticard key in the bottom left corner of the
Opticard, from left to right or from right to left, to
activate Opticard Mode. When Opticard Mode is
activated, the light in the tip of the Pen blinks rapidly.
3. Slowly scan the character key, from right to left or from
left to right, or touch the key gently with the tip of your
Pen. The letter appears in the Pen display.
Use the following key combinations to enter the required
characters: