Wizcom Quicktionary 2 - Manual (Page 4)

Getting Started
4
Basic Pen Commands
The Pen Keys and their Functions
The keypad contains seven keys for operating your Pen. Use
the keys as follows:
ƒ
Power key : Turn the Pen on and off.
ƒ
ENT key : Access submenus or screens, confirm a
selection or perform an operation.
ƒ
ESC key : Navigate backwards, close a screen, or
cancel an operation.
ƒ
Direction keys : Scroll through menus and
screens.
Navigating Menus and Lists
To select an item from a menu or a list:
1. Scroll through the menu, using or until the item
you want is highlighted.
2. Press ENT.
To select a command key on the display:
1. Use the direction keys to highlight the command key.
2. Press
ENT.
To return to a previous menu level from a sub-menu, option
or list, press ESC.
Scanning Guidelines
Scanning Mode
The Pen is in scanning mode when the red light at the tip of
the Pen is blinking. Scanning mode is disabled when
accessing menus.
Scanning Direction
Text can be scanned from right to left or from left to right.
Both will produce the same results.
Scanning Restrictions
The Pen scans and recognizes printed text in a wide range of
languages, font types and point sizes (6-22 points, up to 8mm)