Wolf ICBWWD30 - Manual (Page 10)

10
W O L F W A R M I N G D R A W E R
M O D E L I C B W W D 3 0
with Integrated Drawer Front
Overall Width 746 mm
Overall Height 257 mm
Overall Depth* (behind frame) 597 mm
Minimum Cabinet Requirements
Overlay
838 mm W x 610 mm D
Inset 838 mm W x 635 mm D
Minimum Base Support 91 kg mm
Opening Width 749 mm
Opening Height 260 mm
Opening Depth** 610 mm
Minimum Panel Size
Overlay
762 mm W x 264 mm H
Inset 746 mm W x 257 mm H
Minimum Panel Thickness 16 mm
Maximum Panel Weight 11 kg
*Allow 10 mm additional depth for cord thickness.
**For the inset application, add the thickness of
the drawer face to the opening depth.
Overall Dimensions – Integrated Drawer Front
Integrated Drawer Front – Overlay Application
I N T E G R AT E D D R A W E R F R O N T
I N S T A L L A T I O N S P E C I F I C A T I O N S
The following illustrations provide the overall
dimensions and installation specifications for
the Wolf warming drawer with integrated
drawer front. The warming drawer with inte-
grated drawer front can be used in an overlay
application or an inset panel application where
it will be completely recessed in to the cabinet.
Keep in mind that the size of the custom panel
for the warming drawer with integrated drawer
front will vary according to the specific instal-
lation. The following chart provides minimum
dimensions for the overlay and inset panel
applications.
Refer to pages 18–20 for integrated drawer
front installation instructions. These instruc-
tions are also included with the integrated
drawer front kit.