Walker 5600-20 - Manual (Page 18)

ASSEMBLY
OM 0352SB-A
15
13. Figure 12: Reinstall the gearbox shield
(item 1) and the two serrated flange bolt
5/16"NC x 1/2" (item 2).
Installation of Tire Chains (Optional)
1. Remove the tractor wheels.
2. Attach the 2 tire chains to the wheels.
3. Place the wheel spacer plates on the lug
bolts. The wheel spacer plates provide
clearance for the chains between the tires
and the tractor body.
4. Place the wheels back on the tractor.
5. Reinstall and tighten the lug bolts.
Counterweights
For stability of the tractor when transporting
with the snowblower raised position,
approximately 80 lbs (36 kg) of counterweight
should be installed on the tail of the tractor.
Optional tail weights for the various tractor
models are available from your Walker dealer.
Tractors with GHS
(Figure 13)
For GHS (Grass Handling System) equipped
Walker tractors; install a blower intake cover in
the blower intake tube. The cover «unloads»
the blower and seals the intake to effectively
eliminate power loss and noise when the
blower is being used.
Figure 13
Figure 12