Hyundai H-CMMD4042 - Manual (Page 44)

44
Scan tuning
1. You can scan each stored channel for 10 seconds in sequence. Press the ENTER button on the panel to start
scanning.
2. Press the PLAY/PAUSE / ENTER / SCAN button on the panel or the STOP/BUTTON on the RC to stop
auto scanning.
Select the TV station
1. Press the number buttons on the RC to recall the desired TV station.
To enter the 2-digit number of station
2. To change the station use the / button on the RC or buttons on the panel to change the channels
step by step in forward/backward direction.
Display TV station
To display current TV station number press the DISP button on the RC.
AUX IN mode
This mode is for using the unit as an AV signal amplifier or connecting the rear-view camera.
Connect the peripheral device (DVD player, video-camera, rear-view camera etc) to the unit via RCA output
and AUX in. The unit will be switched into the AUX mode and will show the picture from the device
connected.
You can use the VOL knob, functional buttons, set the video and audio parameters from the unit.
To enter the AUX in mode press the SRC button repeatedly.