Hyundai H-CMMD4042 - Manual (Page 54)

54
3. Press the buttons on the panel or / buttons on the RC or
touch the desired button on the screen to enter the list of values.
4. Press the buttons on the panel or / buttons on the RC or touch the desired button on the screen
to select the desired value.
5. Press PLAY/PAUSE / ENTER / SCAN button to confirm.
Surround mode: select the surround sound effect: Off (playback as the original audio output), Surround I
(using the DPL as the decoding method), Surr matrix (from mono output to surround effect), Surr movie
(enhance movie surround effects), Surr music (surround music effects).
Panorama: extend the audio from the front to the rear to achieve a better audio surrounding effect. Panorama is
available for adjustment only when PL II music mode is activated. Select the mode: On, Off.
Dimension control: adjusting the distribution the front and rear audio output to achieve a better balanced audio
surrounding effect. Dimension control is available for adjustment only when PL II music mode is activated.
Select the audio output shift between front and rear: 1, 2, 3, 4, 5, 6.
Center width ctrl: the audio output from center may come directly from center speaker, or from left and right
speakers - an illusion effect, or from all three speakers by adjusting the center width. Adjusting the central
width provides a better balance of audio surround effect.
Center width control is available for adjustment only when PLII Music mode is activated.
Select the audio output shift between front and center: 1, 2, 3, 4, 5, 6.