West Bend L5685 - Manual (Page 4)

U
SING
Y
OUR
F
OOD
C
HOPPER
Before using your food chopper, wash chopping bowl, bowl cover and chopping
blade with hot soapy water or in a dishwasher. Rinse thoroughly and dry. Wipe
surfaces of chopper base with a damp cloth and dry. NOTE: Do not submerge
chopper base in water or put in dishwasher. Do not use abrasive cleaning products
on any part of chopper. CAUTION: Be extremely careful while handling and
cleaning the chopping blade, as blades are extremely sharp.
Bowl Cover
Cover Tab Extension
Chopping Blade Handle
Chopping Blade
Chopping Bowl
Center Hub
4
1. Place base on dry,
level surface. Do not
plug cord into electrical
outlet until all parts of
chopper are
assembled and food
added.
2. Place chopping bowl
onto base with center
hub over drive shaft.
Turn bowl clockwise to
secure in place.
3. Place chopping blade
in bowl over hub,
rotating slightly if
necessary to drop
blade in place.
4. Place up to 3 cups of food, cut into 1-inch or smaller pieces,
evenly into bowl over chopping blade. Do not attempt to chop
more than 3 cups of food at one time, as poor results will be
obtained.
5. Place cover onto bowl with tab extension to left of base tower.
Turn cover clockwise to secure tab in slot of base. You will
hear a “click” when tab is fully engaged in slot. The chopper
Slot
Drive Shaft
Base Tower
Chopper Base
LO Speed Button
HI Speed Button