Walker W1100 - Manual (Page 9)

E
N
G
L
I
S
H
9
Walker Clarity comes assembled with
mounting bracket attached in desk mount
position. For wall mounting simply remove
bracket, rotate 180
°
and reattach as
shown.
To Install As a Wall Unit:
Important: A modular wall jack with raised
mounting pins is required for installation
as a Wall Unit.
• Insert AC adapter into back of base unit,
run cord underneath back plate and
through opening on bottom.
• Plug AC adapter directly into standard
120 volt outlet.
Desk
Mount
key
Wall
Mount
Key
INSTALLATION
Back of
Phone
Wall
Mount
Bracket
• Attach the wall-mounting bracket to the
bottom of the Walker Clarity. It snaps into
place. The cord should run underneath the
wall mounting bracket.
• Plug one end of the telephone line cord
(long, flat) into the back of the Walker
Clarity.
• Plug the other end of the telephone line
cord into the wall jack with raised mount-
ing pins. You can store excess line cord
inside the wall mounting bracket.
Note: If the wall-mounting bracket is
already placed in the desk mount position,
remove it by pressing the tabs and turning
it 180
°
per the key shown for the wall-
mount.