Windmere I-210 - Manual (Page 5)

8 7
SPECIAL INSTRUCTIONS
❑ To avoid a circuit overload, do not operate another high-wattage
appliance on the same circuit.
❑ if an extension cord is absolutely necessary, a 15-ampere and
120-volt, or 7-ampere and 220-volt cord should be used. cords
rated for less amperage may overheat. care should be taken to
arrange the cord so that it cannot be pulled or tripped over.
SAVE THESE INSTRUCTIONS.
POLARIZED PLUG (120V Models Only)
This appliance has a polarized plug (one blade is wider than the other). To reduce
the risk of electric shock, this plug is intended to fit into a polarized outlet only
one way. if the plug does not fit fully into the outlet, reverse the plug. if it still
does not fit, contact a qualified electrician. do not attempt to modify the plug in
any way.
TAMPER-RESISTANT SCREW
Warning: This appliance is equipped with a tamper-resistant screw to prevent
removal of the outer cover. To reduce the risk of fire or electric shock, do not
attempt to remove the outer cover. There are no user-serviceable parts inside.
repair should be done only by authorized service personnel.
Note: If the power supply cord is damaged, it should be replaced by qualified
personnel or in Latin America by an authorized service center.
Product may vary slightly from what is illustrated.
Fabric guide
1. Water-fill opening
2. Dry/steam selector
3. Temperature-ready light
4. Pivoting cord
5. Heel rest 6. Fabric guide
7. Water tank
8. Fabric-select dial
9. Nonstick soleplate









J
K
L
M
O
J
K
L
M
O
Dry
Steam
Symbols