White Rodgers 1F97W-71 - Manual (Page 25)

25
3. Press SET
CLOCK
once. The display window will
show the hour only.
EXAMPLE:
4. Press and hold either TIME
FWD
or TIME
BACK
until you
reach the correct hour and AM/PM designa-
tion (AM begins at midnight; PM begins at
noon).
5. Press SET
CLOCK
once. The display will show the
day of the week as an abbreviation (MON for
Monday, TUE for Tuesday, etc.).
6. Press and hold either TIME
FWD
or TIME
BACK
until you
reach the current day of the week.
7. Press RUN
PRGM
once. The display will show the
correct time and room temperature alternately.
Select Heating and Cooling Temperatures
During programming, if you don’t press any but-
tons for 5 minutes, the thermostat will enter the
HOLD mode and will maintain a constant tempera-
ture. The display will revert to the alternating time/
temperature display. To resume programming
after this happens, press VIEW
PRGM
until you are at the
point where you stopped programming. Then you
may continue to enter your programs normally. If
you want to stop programming at any time, simply
press RUN
PRGM
to resume program operation.
1. Press SYSTEM
HEAT-OFF-COOL-AUTO
until HEAT is displayed.
2. Press VIEW
TEMP
once. The display will continue to
show HEAT. Below HEAT is the letter A,
representing the first programmed heating