White Rodgers 1F97W-71 - Manual (Page 26)

26
temperature (HEAT A). At the right of the
display is the currently programmed HEAT A
setting.
3. Press either or to change the
temperature to your selected HEAT A setting
(if you only want to program a temperature for
HEAT A, skip to step 7.)
4. Press VIEW
TEMP
once. The letter A will change to
the letter B, representing HEAT B.
5. Press either or to change the
temperature to your selected HEAT B setting (if
you only want to program temperatures for
HEAT A and HEAT B, skip to step 7).
6. Repeat steps 4 and 5 to select HEAT C and
HEAT D temperature settings, if desired.
7. Press RUN
PRGM
.
8. Press SYSTEM
HEAT-OFF-COOL-AUTO
until COOL is displayed.
9. Press VIEW
TEMP
once. The display will show
COOL and A, representing the first pro-
grammed cooling temperature (COOL A).
10. Press either or to change the
temperature to your selected COOL A setting
(if you only want to program a temperature for
COOL A, skip to step 13).
11. Press VIEW
TEMP
once. Press or to set
your selected COOL B setting (if you only
want to program temperatures for COOL A
and COOL B, skip to step 13).
12. Repeat step 11 to select COOL C and COOL
D temperature settings, if desired.
13. Press RUN
PRGM
.