Wells WV-2HGRW - Manual (Page 15)

INSTALLATION (continued)
13
CAUTION:
Burn Hazard
DO NOT OPERATE UNLESS
THE GREASE DRIP TRAY
IS INSTALLED.
Moisture will drip into the hot
cooking surface causing
splattering of hot liquids.
Serious injury can result from
contact with hot splatter.
GREASE DRIP TRAY INSTALLATION
1. Install the GREASE DRIP TRAY on the hanger brackets, directly
below the grease baffle.
INSTALL COOKING APPLIANCE COMPONENTS
1. HOTPLATE (spiral elements only)
a. Lift/rotate the elements up.
b. Install one DRIP PAN in each hotplate well.
c. Install one ELEMENT SUPPORT in the indents in each DRIP
PAN.
d. Rotate elements back into operating position.
2. If appliance is equipped with the optional warmer drawers:
a. Install WARMER PANS on warmer drawer rails.
b. Insert Humitrol racks (if provided).
Fig. 7 Hotplate Drip Pan Installation
Fig. 8 Roll Warmer Drawer Pan Installation