Wells WV-2HGRW - Manual (Page 7)

ITEM
V.01
V.02
V.03
V.04*
V.05*
V.06*
G.01
G.02
G.03
G.04
G.05
G.06
H.01
H.02
H.03
H.04
H.05
H.06
D.01
D.02
D.03
D.04
D.05
D.06
DESCRIPTION
POWER SWITCH
POWER ON INDICATOR
CHECK FILTERS ALARM
INDICATOR
REPLACE PREFILTER ALARM
INDICATOR
REPLACE FILTER PACK ALARM
INDICATOR
SERVICE REQUIRED ALARM
INDICATOR
GRIDDLE TEMPERATURE
CONTROL
GRIDDLE HEAT INDICATOR
GREASE DRAWER
COOKING SURFACE
WASTE TROUGH
WASTE CHUTE
TEMPERATURE CONTROLS
POWER INDICATOR
SOLID HEATING ELEMENTS
SPIRAL HEATING ELEMENT
DRIP PAN
ELEMENT SUPPORT
TEMPERATURE CONTROL
POWER INDICATOR
THERMOMETER
HUMIDITY CONTROL
DRAWER PAN
HUMITROL RACK
COMMENT
Energizes BLOWER MOTOR. If, after 10 seconds, proper conditions are met,
cooking appliances are energized.
APPLIANCE LIGHT is ON when POWER SWITCH is ON.
GREEN. Glows when POWER switch is ON.
AMBER. Glows if one or more filters are out of position. Check all filters and
baffles for proper installation.
AMBER. Glows when PREFILTER is approaching the end of its service life and
must soon be replaced.
AMBER. Glows when FILTER PACK is approaching the end of its service life
and must soon be replaced.
RED. Glows when PREFILTER and/or FILTER PACK has reached the end of
its service life and is too loaded to allow sufficient air flow. Filter MUST be
replaced. Appliance is SHUT DOWN until expended filters are replaced.
Thermostatic control of griddle temperature
Glows when heating elements are energized.
Collects cooking waste from GRIDDLE. Removable for cleaning.
Heated portion for cooking food.
Scrape cooking waste to this area.
Cooking waste moved into GREASE DRAWER thru this opening.
Individual infinite switch control of the hotplate HEATING ELEMENTS
Glows anytime the TEMPERATURE CONTROL is in any position other than
OFF.
WV2HG heating/cooking portion. Element is fixed in position.
WV2SHG heating/cooking portion. Element rotates for cleaning.
Catches drippings and crumbs (spiral element only). Removable for cleaning.
Supports the spiral element. Removable for cleaning.
Thermostatic control of warmer cavity temperature. Each drawer is individually
controlled.
Glows anytime the TEMPERATURE CONTROL calls for heat.
Indicates temperature inside the warmer cavity
(Note: THERMOMETER must be ordered at time of original build.)
Slide control of vents. OPEN for dry operation or CLOSE for humid operation.
Holds product.
Holds product above the pan bottom to allow a small amount of water to be
added to the pan for humid operation.
FEATURES & OPERATING CONTROLS (continued)
* See PRECAUTIONS & GENERAL INFORMATION, pages 8 for special procedures regarding prefilters and filter packs.
VENTILATOR SECTION CONTROLS
5
GRIDDLE SECTION
HOTPLATE SECTION
OPTIONAL DRAWER WARMER SECTION