Whirlpool 2201959 - Manual (Page 12)

R
EMOVING THE MEAT DRAWER
AND COVER
(on some models)
To remove the meat drawer:
1. Slide meat drawer out to the stop.
2. Lift front of meat drawer.
3. Slide meat drawer out the rest of the way.
4. Replace in reverse order.
Style 1
To remove the cover:
1. Remove meat drawer.
2. Push cover back to release rear clips
from shelf.
3. Tilt cover up at front.
4. Pull cover forward and out.
To replace the cover:
1. Fit notches and clips on underside of
cover over rear and center cross bars on
shelf.
2. Lower cover into place.
3. Pull cover forward to secure rear clips
onto shelf.
4. Replace meat drawer.
Style 2
To remove the cover:
1. Remove meat drawer.
2. Take the half width cover with both
hands, lift up the shelf side resting on the
side wall of the refrigerator.
3. Turn the cover toward the opposite side
wall.
4. Tilt the cover up at front, then tilt cover
up at back until rear hook is out of the
center shelf support and pull cover
toward you.
To replace the cover:
1. Guide the rear cover hooks into the slot
of the center support.
2. Tilt the front of the cover up until rear
hook drops into slot.
3. Rest cover on side wall.
4. Make sure shelf is firmly supported.
12
Lock Center support
Slot
Style 1
Style 2
2201959.v17.c58 7/13/99 3:30 PM Page 12