Whirlpool 2201959 - Manual (Page 7)

7
E
LECTRICAL REQUIREMENTS
Before you move your refrigerator into its
final location, it is important to make sure
you have the proper electrical connection.
Recommended Grounding Method
Plug 1: A 115 Volt/60 Hz AC only 15 to 20
ampere fused and properly grounded
(earthed) electrical supply is required.
Plugs 2 and 3: A 220/240 Volt/50 Hz or 220
Volt/60 Hz AC only 10 ampere fused and
properly grounded (earthed) electrical supply
is required.
NOTE: Before performing any type of
installation, cleaning, or removing a light
bulb, turn the Temperature Control to OFF
and then disconnect the refrigerator from
the electrical source. When you are finished,
connect the refrigerator to the electrical
source and reset the Temperature Control to
the desired setting.
Plug 1
Plug 3
w WARNING
Electrical Shock Hazard
Plug into a grounded (earthed) outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions
can result in death, fire, or
electrical shock.
Plug 2
2201959.v17.c58 7/13/99 3:30 PM Page 7