Whirlpool 2201959 - Manual (Page 14)

Door stop
Spacer
Shim
Hinge Pin
Screws
Spacer
Hinge
Bracket
14
R
EVERSING THE DOOR SWING
SUGGESTION: Reversing the door swing
should be performed by a qualified person.
IMPORTANT INFORMATION:
• Before you begin, turn refrigerator OFF,
unplug it, and remove any food from door
shelves.
• When removing hinges, keep doors
closed until ready to lift free from cabinet.
• To remove doors, start at the top hinge
and work your way down.
• To replace doors, start at the bottom hinge
and work your way up.
• Line up doors so they are centered between
the sides of the cabinet and parallel with
each other.
• Seal all unused openings with screws or
plastic plugs. Moisture will enter any
openings.
NOTE: After the doors are reversed, reinstall
the handles. If the doors are not shutting on
their own, see the “Door Closing and
Alignment” section.
Door stop
Spacer
Screw
Shim
Hinge pin
Screws
Cover
Screws
Top hinge
Shim
Spacer
Screws
CENTER HINGE
TOP HINGE
BOTTOM HINGE
2201959.v17.c58 7/13/99 3:31 PM Page 14