White Outdoor Z - 180 - Manual (Page 18)

18
SECTION 6: ADJUSTMENTS
ADJUSTING THE MOWER DECK HEIGHT
1. Push or pull on the Lift Lever and depress and hold the button.
2. Move the handle up/down to the desired position.
3. Release button at the desired position.
ADJUSTING THE SEAT POSITION
1. Lift the Seat Adjustment Lever. (See Figure 11)
2. Slide the seat either forward or back to the desired location.
3. Lock the seat in position by releasing the Seat Adjustment Lever.
CHECKING THE BRAKE ADJUSTMENT
1. Position the Z-series on a level surface.
2. Move the throttle lever to the slowest position (turtle).
3. Stop the engine and remove the key from the ignition.
4. Engage the Parking Brake.
5. Release both Hydraulic Relief Levers.
6. From the rear, push on the frame and try to move the Z-series.
7. Release the Parking Brake. Try again to move the Z-series by pushing.
If you: Then:
Can move it The brake force must be increased. Go to
ADJUSTING BRAKE FORCE.
Can NOT move it Go to Step 7.
If you: Then:
Can NOT move it The brake force must be decreased. Go to
ADJUSTING BRAKE FORCE.
Can move it You are done (no adjustment necessary).