Windows Marketplace V.90 - Manual (Page 7)

7
5. Firmly, but gently, insert the modem into the available PCI expansion slot.
Ensure that the card is seated properly before securing it with the screw re-
moved in Step 4, as shown in the following diagram:
Fig. 6: Installing The Modem
6. Put the chassis cover back on the computer.
7. Be sure that all power switches are in the OFF position, then reconnect the
power cables to the computer and its peripherals.
8. Connect the telephone line cable to the Line (Telco) jack as shown in Fig.7.
9. Turn on the computer and proceed to the following sections to configure your
modem to the operating system you are using.