Western Telematic MPC-20VS16-3 - Manual (Page 100)

5-69
Basic Configuration
Example:
The following command could be used to set the command access level to "User", allow
access to Serial Ports 1, 3, 5 and 7 and Plugs 1 and 2, and also allow access to the first
two of five defined plug groups:
tom Auth-Type:=Local, User-Password=="tom1"
Login-Service=Telnet,
Login-TCP-Port=Telnet,
User-Name="HARRY-tom",
WTI-Super="1",
WTI-Plug-Access="1100",
WTI-Group-Access="11000",