Wacom Cintiq DTZ-2000W - Manual (Page 15)

Cintiq pen display components
Page 13
CINTIQ PEN DISPLAY COMPONENTS
After the Cintiq pen display is safely mounted on the Cintiq stand, take some time to familiarize yourself
with its features and components.
The LCD monitor and tablet sensor function as an integrated input and output device. The LCD monitor
supports resolutions up to 1680 x 1050 pixels at 16.7 million colors. The tablet sensor reports pen
coordinates, pressure, tilt, switch, eraser, and other information.
Front view
Power LED
Lights blue when power has been supplied to
Cintiq and a video signal is present.
Glows orange when no video signal is
detected by Cintiq. (e.g., Your computer is
turned off, starting up, or has entered a power
management mode in which video signals
are not sent.)
Power switch
Turns power to
the unit on or off.
Status LED
Lights blue when the pen is in the
active area of the pen display tablet
and the pen tip, eraser, or side switch
are pressed. Note that the USB cable
connector must be plugged into an
active USB port and a video signal
must be present before the LED will
light.
Integrated LCD monitor and tablet
ExpressKeys
All ExpressKeys can be customized to simulate modifier keys,
keystrokes, and other frequently used functions. A display
toggle function is also available, enabling you to toggle the
screen cursor between the Cintiq pen display and your other
displays. See Working with the tablet controls on page 25.
ExpressKeys
By default, the upper
ExpressKeys on each side
of the pen display support
a T
OUCH S TRIP M ODIFIER
function not available to
the lower ExpressKeys.
Cintiq20WSX_Manual.fm Page 13 Monday, January 15, 2007 9:23 AM