Wacom Cintiq DTZ-2000W - Manual (Page 19)

Installation
Page 17
• Be sure to tighten the thumbscrews on the connectors.
• Connect the power adapter to Cintiq. See – C – on the next page. Then connect the adapter’s
power cable and plug the adapter into an AC outlet. See – D –
If you are connecting to an Apple computer with one of the following
video ports, you will need to use an adapter:
If you are connecting to an ADC connector, you will need to obtain an
ADC to DVI-I adapter. Plug the Cintiq video cable into the ADC to
DVI-I adapter. Then plug the ADC adapter end into the ADC connector
on your video card.
If you are connecting to an Apple mini-VGA connector, you will need to
obtain a mini-VGA to VGA adapter. Plug the Cintiq video cable into the
VGA to DVI-I adapter (supplied with Cintiq). Plug the mini-VGA
adapter into the computer’s mini-VGA port. Then plug the male and
female VGA connectors together.
These adapters can be purchased at various retail outlets.
Apple ADC
connector
Mini-VGA port
Cintiq20WSX_Manual.fm Page 17 Monday, January 15, 2007 9:23 AM