Wacom Cintiq DTZ-2000W - Manual (Page 39)

Customizing
Page 37
The basic process for working with the OSD is as follows:
• Press the M ENU button to open the OSD main menu.
• Use the up or down buttons to select an option. When the option you want to adjust is highlighted,
press the E
NTER button. The current settings and adjustment sub-menu for that option will appear.
• Use the up or down buttons to adjust the option settings.
• When you have made your changes, press the E NTER button to save. To exit, press the M ENU
button.
Note: All settings are automatically saved when the OSD menu closes and will be used the next
time the unit receives a similar video signal. This is applicable to all display modes. If you make
changes to the display appearance and cannot return to the original settings, use the R
ESET
R ECALL option to return Cintiq to its original factory defaults.
When you open the On Screen Display (OSD), the following menu options are displayed as icons:
C ONTRAST . Select to
increase or decrease
image contrast.
B RIGHTNESS . Select to
increase or decrease
image brightness.
P HASE . (VGA only)
Select to reduce or
eliminate horizontal
distortion lines.
To automatically
adjust, use the R
ESET
option.
P ITCH . (VGA only)
Select to reduce or
eliminate vertical
distortion lines.
To automatically
adjust, use the R
ESET
option.
H ORIZONTAL C ENTER .
(VGA only) Select to
move the screen image
left or right.
To automatically
adjust, use the R
ESET
option.
V ERTICAL C ENTER .
(VGA only) Select to
move the screen image
up or down.
To automatically
adjust, use the R
ESET
option.
M ENU P OSITION .
Select to move the
OSD menu around the
display screen.
L ANGUAGE . Select to
choose a language
option for the OSD.
Cintiq20WSX_Manual.fm Page 37 Monday, January 15, 2007 9:23 AM