Zebra Technologies Printers - Manual (Page 9)

1
Installation
This section provides information on the
installation of the printer and software.
Introduction The Strata printer models are low cost, manu-
facturing oriented, thermal desktop printers.
The Strata LP is a direct thermal printer. The
Strata TLP is a thermal transfer and direct ther-
mal printer. The printers have been specifically
designed for printing large labels, hazardous
material labels, small signs, fan-fold media, and
shipping and receiving labels while operating in
office to industrial environments.
The printer features sturdy construction, a small
footprint, a heavy-duty motor, and sharp, reli-
able printing up to 8.5 inches (216 mm) wide.
The print head resolution of a Strata printer is
203 dpi (8 dots/mm).
The printer can print letter (8.5”x 11”) and A4
(210mm x 297mm) sizes. Print forms up to 8.5
inches (216 mm) wide and 22 inches (558.8
mm) long or two times A4 (210mm x 594mm)
size with optional memory added.
980181-001 Rev.C
1
Installation