Yamaha X-V2600 - Manual (Page 34)

30
CONNECTIONS
■ Connecting the AC power cable
Plug the supplied AC power cable into the AC inlet after
all other connections are complete and then plug the AC
power cable to an AC wall outlet.
Use the supplied AC cable. Do not use other AC power cables as
doing so may result in fire hazard or electrical shock.
■ AC OUTLETS (SWITCHED)
Use these 2 outlets to supply power to any connected
components. Connect the AC power cables of your other
components to these 2 outlets. Power to these 2 outlets is
supplied when the main room, Zone 2 or Zone 3 is turned
on. However, power to these 2 outlets is cut off when the
main room, Zone 2 and Zone 3 are turned off or when
MASTER ON/OFF on the front panel is pressed and
released outward to the OFF position. The maximum
power or the total power consumption of the components
that can be connected to these 2 outlets is 100 W.
When all connections are complete, turn on the power of
this unit.
1
Press MASTER ON/OFF on the front panel
inward to the ON position to turn on the
power of this unit.
• Only this unit is turned on.
• Zone 2 and Zone 3 are set to the standby mode.
2
Press MAIN ZONE ON/OFF on the front panel
(or STANDBY on the remote control) to set
this unit to the standby mode.
Connecting the power cable
CAUTION
Memory back-up
The memory back-up circuit prevents the stored data
from being lost. However, the stored data will be lost
in case the power cord is disconnected from the AC
wall outlet for more than one week.
AC OUTLETS
AC IN
100W MAX.TOTAL
SWITCHED
(U.S.A. model)
Turning on and off this unit
A
SPEAKERS
YPAO
B
MULTI CH INPUT AUDIO SELECT TONE CONTROL STRAIGHT PRESET/ TUNING
EDIT
MAN'L/AUTO FM SEARCH MODE DISPLAY AUTO/MAN'L EFFECT
TUNING MODE MEMORY
ZONE 2
ZONE ON/OFF
ZONE 3
ZONE CONTROL
FM/AM A/B/C/D/E
CATEGORY
SOURCE/ REMOTE
REC OUT/ZONE 2
SILENT CINEMA S VIDEO VIDEO L
VIDEO/AUX
AUDIO R OPTICAL
PHONES
PRESET/TUNING/CH
OPTIMIZER MIC
VOLUME
PROGRAM
INPUT MAIN ZONE
PURE DIRECT
ON/OFF
MD/TAPE DVD DTV
V-AUX
CBL/SAT
VCR 1
CD-R
CD
TUNER
PHONO DVR/ VCR 2
MASTER
ON OFF
MULTI ZONE
2,3
1,4
(U.S.A. model)
MASTER
ON OFF
ON/OFF
STANDBY
or
Front panel Remote control