Yamaha X-V2600 - Manual (Page 81)

SYSTEM OPTIONS
77
AD
V
A
N
C
ED
OPERA
T
ION
You can use the following parameters to adjust a variety of system settings and customize the way this unit operates.
Change the initial settings (indicated in bold under each parameter) to reflect the needs of your listening environment.
■ Stereo/Surround (Stereo/Surround menu)
Use to edit sound field parameters (see page 63).
■ Input Select (Input select menu)
Use to reassign digital input/outputs, select the input signal, rename the inputs, or adjust the output volume of each jack
(see page 80).
■ Manual Setup (Manual setup menu)
Use to manually adjust speaker and system settings (see page 83).
Sound (Sound menu)
Use to manually adjust the sound parameters.
Video (Video menu)
Use to manually adjust the video parameters.
Basic (Basic menu)
Use to manually adjust basic system parameters.
SYSTEM OPTIONS
Item Features Page
LFE Level Adjusts the output level of the LFE channel for Dolby Digital or DTS signals. 83
Dynamic Range Adjusts the dynamic range for Dolby Digital or DTS signals. 84
Parametric EQ Adjusts the parametric equalizer of each speaker. 84
Tone Control Adjusts the tonal balance of speakers and headphones. 85
Audio Option Customizes overall audio settings for this unit. 85
Channel Mute Selects specific speaker channels to be muted. 87
Item Features Page
Conversion Converts the analog video signals. 88
Component I/P Deinterlaces the analog video signals from 480i to 480p (NTSC) or 576i to 576p (PAL). 88
HDMI Up-Scaling Up-scales the analog video signals to HDMI. 88
HDMI Aspect Selects the HDMI aspect ratio. 89
Short Message Displays short messages regarding system operations. 89
Position Adjusts the vertical and horizontal position of the GUI display. 89
Wall Paper Selects the background of the GUI display. 89
Item Features Page
Test Tone Turns the test tone output on or off for Speaker Set, Speaker Distance and Speaker Level settings. 90
Speaker Set
Selects the output mode suitable for each speaker, the speakers for low-frequency signal output,
and the cross over frequency.
90
Speaker Distance Adjusts the delay time of each speaker. 92
Speaker Level Adjusts the output level of each speaker. 93
THX Set Adjusts the THX settings. 94