Yamaha X-V2600 - Manual (Page 87)

83
SYSTEM OPTIONS
AD
V
A
N
C
ED
OPERA
T
ION
Use this menu to adjust the sound parameters.
1
Set AMP/SOURCE/TV to AMP and then press
GUI TOP on the remote control.
2
Press k / n on the remote control to select
Manual Setup and then press h.
3
Press k / n on the remote control to select
Sound and then press h.
4
Select the desired parameters and then press
h to access and adjust.
■ LFE Level (Low-frequency effect level)
Use to adjust the output level of the LFE (low-frequency
effect) channel according to the capacity of your
subwoofer or headphones. The LFE channel carries
low-frequency special effects which are only added to
certain scenes. This setting is effective only when this unit
decodes Dolby Digital or DTS signals.
To access these parameters, select:
Manual Setup > Sound > LFE Level >
Control range: –20.0 to 0.0 dB
Control step: 1 dB
Speaker (Speaker low-frequency effect level)
Select to adjust the speaker LFE level.
Headphone (Headphone low-frequency effect
level)
Select to adjust the headphone LFE level.
Depending on the settings of LFE Level, some signals may not be
output at the SUBWOOFER jack.
Manual Setup (Sound)
GUI TOP
TITLE
BAND
AMP
SOURCE
TV
A-E/CAT.
ENTER
PRESET/CH
A-E/CAT.
ENTER
PRESET/CH
Dynamic Range
LFE Level
Tone Control
Audio Option
Parametric EQ Sound
Video
Basic
A-E/CAT.
ENTER
PRESET/CH
A-E/CAT.
ENTER
PRESET/CH
A-E/CAT.
ENTER
PRESET/CH
Note
Speaker
Headphone
0.0dB