Zanussi ZHF865 - Manual (Page 28)

TO REPLACE THE OUTER
DOOR GLASS
1. Holding the door glass panel with both
hands, gently place the locators into the
holes of the brackets at the bottom of the
oven door.
2. Holding the door glass with your left hand,
use your right hand to open the oven door.
Bring the door gently towards the glass panel
ensuring the screw location holes line up.
3. Place the trim in the correct position on the
top of the grill door.
4 Hold the glass in place with one hand and
insert the cross head screws with washers
into the location holes with the other hand.
Give the screws one turn to ensure the glass
is secure.
5. Tighten the screws positively with a Pozidrive
screwdriver before closing the oven door.
TO CLEAN THE INNER GLASS
DOOR
The inner glass door is not removable. Clean
using hot soapy water or Hob Brite and a soft
cloth. DO NOT use abrasives as they may
damage the glass or seal.
CLEANING THE FAN OVEN
The fan oven top, sides and back panel are
coated with a Stayclean finish.
The Stayclean areas in the fan oven should not
be cleaned manually. See Care of Stayclean
Surfaces on page 30.
The fan oven base can be cleaned using
normal oven cleaners or aerosol oven cleaners
with care. Ensure that the manufacturers
instructions are followed and that all parts are
well rinsed afterwards.
Do not use any cleaning agents or scrapers on
the oven sides, back panels and door seal.
Damage will occur if soap impregnated steel
wool pads, aerosol cleaners or any abrasive
cleaners are used.
28
DO NOT attempt to use the oven
without the glass being in place.