Zanussi ZHF865 - Manual (Page 42)

PREPARING CABINET FOR
FITTING OVEN
Make sure the space between the cabinets is
the correct size for the appliance to be fitted
(Ref. Fig. 5 & 6).
The plinth board spanning the space into
which the appliance is to be installed should
be removed.
If the size between adjacent cabinets is
605-610*mm, then the cabinets should be
modified so that the recommended
dimension of at least 600-605mm is
maintained.
The adjacent cabinets must be stable and
firmly secured to the wall or floor. If
necessary, make arrangements to ensure
the work surface below which the oven will
rest is level.
Drill two pilot screw holes into the sides of
the adjacent cabinets, in the positions
indicated by Fig. 5.
Fit the appliance mounting brackets using
the two holes indicated in Fig. 7 to the
adjacent cabinets ( Ref. Fig.5 & 6 )
42
INSTALLATION INSTRUCTIONS
Fig. 6
Fig. 7
Fig. 5