ZyXEL Communications ZyXEL Dimension ES-3124 - Manual (Page 220)

Dimension ES-3124 Ethernet Switch
30-12 Introducing the Commands
Table 30-3 Command Summary: Configure Mode
COMMAND DESCRIPTION
<T1|T2|T3|T4|T5|T6>
interface <port-
list>
Removes ports from the specified
trunk group.
<T1|T2|T3|T4|T5|T6>
<cr>
Disables the specified trunk group.
bcp-transparency Disables bridging control protocols
such as STP.
storm-control Disables broadcast storm control.
bandwidth-control Disables bandwidth control.
vlan1q gvrp Disables GVRP on the switch.
port-isolation Disables port isolation.
spanning-tree Disables STP.
<port-list> Disables STP on listed ports.
timesync Disables the time setting on the
timeserver.
radius-server Disables the use of authentication
from the RADIUS server.
port-access-
authenticator
Disables port authentication on the
switch.
<port-list>
reauthenticate
Disables the re-authentication
mechanism on the listed port(s).
<port-list> Disables authentication on the
listed ports.
port-security Disables port security on the
switch.
<port-list> Disables port security on the
specified ports.
<port-list> learn
inactive
Enables MAC address learning on
the specified ports.
snmp-server trap-destination
<ip>
Disables sending of SNMP traps to
a station.
logins <name> Disables login access to the
specified name.
service-control telnet Disables telnet access to the
switch.
ftp Disables FTP access to the switch.
http Disables web browser control to
the switch.
ssh Disables SSH (Secure Shell)
server access to the switch.