Vlan-trunking, Weight, Egress set – ZyXEL Communications ZyXEL Dimension ES-3124 User Manual

Page 250: 9 vlan-trunking, 10 weight, 11 egress set

Advertising
background image

Dimension ES-3124 Ethernet Switch

31-14

Command Examples

Figure 31-27 frame-type Command Example

31.8.9 vlan-trunking

Syntax:

vlan-trunking

Enable VLAN Trunking on ports connected to other switches or routers (but not ports directly connected to end
users) to allow frames belonging to unknown VLAN groups to pass through the switch.

An example is shown next.

Enable ports one, three, four and five for configuration.

Enable VLAN Trunking on the interface.

Figure 31-28 vlan-trunking Command Example

31.8.10 weight

Syntax:

weight <wt1> <wt2> ... <wt8>

where

<wt1> <wt2>
... <wt8>

Sets the interface WFQ weighting. A weight value of one to eight is given to
each variable from wt1 to wt8.

An example is shown next.

Enable port two and ports six to twelve for configuration.

Set the queue weights from Q0 to Q7.

Figure 31-29 weight Command Example

31.8.11 egress set

Syntax:

ras(config)# interface port-channel 1,3-5

ras(config-interface)# vlan-trunking

ras(config)# interface port-channel 1,3-5

ras(config-interface)# ingress-check

ras(config-interface)# frame-type tagged

ras# configure

ras(config)# interface port-channel 2,6-12

ras(config-interface)# weight 8 7 6 5 4 3 2 1

Advertising