Yamaha RX-V365 - Manual (Page 35)

31
En
English
INTR
ODUCTION
AD
DITIONAL
INFORMA
T
ION
APPENDIX
PRE
P
ARA
T
ION
BA
S
IC
OPERA
T
ION
AD
V
ANCED
OPERA
T
ION
ADVANCED OPERATION
You can use the following parameters in the set menu to adjust a variety of system settings and customize the way this
unit operates. Change the initial settings to reflect the needs of your listening environment.
Use this feature to automatically adjust speaker and system parameters (see page 16).
Use this feature to manually adjust speaker and system parameters.
■ Sound menu 1 SOUND MENU
Use this menu to manually adjust any speaker settings, alter the quality and tone of the sound output by the system or
compensate for video signal processing delays when using LCD monitors or projectors.
■ Input menu 2 INPUT MENU
Use this menu to manually reassign the input jacks, select the input mode or rename the input source.
■ Option menu 3 OPTION MENU
Use this menu to manually adjust the optional system parameters.
Use this feature to check audio signal information (see page 20).
Set menu
Basic setup BASIC SETUP
Manual setup MANUAL SETUP
Parameter Features Page
A)SPEAKER SET Selects the size of each speaker, the speakers for low-frequency signal output, the crossover frequency,
and the location of the front speakers connected to the FRONT B terminals.
32
B)SP LEVEL Adjusts the output level of each speaker. 33
C)SP DISTANCE Adjusts the distance of each speaker. 33
D)CENTER GEQ Adjusts the tonal quality of the center speaker. 33
E)LFE LEVEL Adjusts the output level of the LFE channel for Dolby Digital or DTS signals. 34
F)D.RANGE Adjusts the dynamic range of Dolby Digital or DTS signals. 34
G)AUDIO SET Adjusts the muting level, audio delay settings, maximum volume level and initial volume level. 34
Parameter Features Page
A)INPUT ASSIGN Assigns the input jacks on this unit according to the component to be used. 34
B)INPUT RENAME Changes the name of the input source. 34
C)VOLUME TRIM Adjusts the output volume of each jack. 35
D)DECODER MODE Selects the decoder mode for the sources connected to the DIGITAL INPUT jacks on the rear panel of
this unit.
35
E)MULTI CH SET Select the video source played in the background of the sources input from the MULTI CH INPUT jacks. 35
Parameter Features Page
A)DISPLAY SET Adjusts the brightness of the front panel display. 35
B)MEMORY GUARD Locks sound field program parameters and other set menu settings. 35
C)AUDIO SELECT Designates the default audio input jack select setting mode for the input sources connected to the
DIGITAL INPUT jacks when you turn on the power of this unit.
36
D)PARAM. INI Sets all the parameters of the sound field programs to the initial factory settings. 36
E)BLUETOOTH Pairs the connected Bluetooth Wireless Audio Receiver (such as YBA-10, sold separately) with a
Bluetooth component (see page 30).
36
Signal information SIGNAL INFO