Yamaha RX-V365 - Manual (Page 40)

36
En
Set menu
Use this feature to designate the default audio input jack
select setting for the input sources.
Use this feature to set all the parameters of the sound field
programs to the initial factory settings.
Notes
• You cannot automatically revert to the previous parameter settings once
you initialize the sound field program parameters.
• You cannot separately initialize individual sound field programs.
■ Start pairing START PAIRING
Use this feature to start pairing the connected Bluetooth
Wireless Audio Receiver (such as YBA-10, sold
separately) with your Bluetooth component. For details
about the pairing, refer to “Pairing the Bluetooth™
receiver and your Bluetooth™ component” on page 30.
1
Select “START PAIRING” in “BLUETOOTH”
and then press lENTER to start pairing.
The connected Bluetooth receiver starts searching
Bluetooth components. “Searching...” appears on the
front panel display.
2
Check that the Bluetooth component detects
the Bluetooth receiver.
For details, refer to the instruction manual of the
Bluetooth component.
3
Select the Bluetooth receiver in the
Bluetooth device list and then enter the pass
key “0000” on the Bluetooth component.
Once this unit completes the pairing successfully,
“Completed” appears.
y
• To cancel the pairing, press nRETURN to exit from “START
PAIRING.”
4
Press nRETURN to exit from “START
PAIRING.”
Notes
• If the connected Bluetooth receiver cannot find any Bluetooth
components, “Not found” appears.
• If a Bluetooth receiver is not connected to this unit, “No BT adapter”
appears.
Audio select C)AUDIO SELECT
Choice Function
AUTO* Automatically detect the type of input signals and
select the appropriate input mode.
LAST Automatically select the last input mode used for the
connected input source (see page 18).
Parameter initialization D)PARAM. INI
Choice Function
NO* Cancels the parameter initialization and returns to the
previous menu level.
YES Sets all the sound field parameters to the initial factory
settings.
Bluetooth setting E)BLUETOOTH
To ensure security, a time limit of 8 minutes is set for
the pairing operation. You are recommended to read
and fully understand all the instructions before starting.