Yamaha POCKETRAK 2G User Manual
Page 50
Appendix
50
POCKETRAK 2G Reference Manual
The Removable Disk is not displayed when the unit is connected to the PC.
Cannot recharge the eneloop.
A file can’t be erased.
[ERROR FILE SYSTEM] is displayed and nothing else happens.
Cannot select the S folder.
Icon “
” appeared when you attempted to recharge the battery.
Possible cause
The unit is not connected to the PC correctly.
Corrective action
Make sure the connection is correct.
Disconnect the unit from the PC and reconnect it again.
Possible cause
Sufficient power is not being supplied from the PC to the unit.
Corrective action
If a USB hub is being used, reconnect the unit directly to the USB terminal on the PC. If the PC
is equipped with several USB terminals, try another terminal.
Possible cause
A network drive has been assigned.
Corrective action
If a network drive has been assigned, the drive letter (the letters used as drive names) is
already taken, so the Removable Disk cannot be created. Change the network drive assign-
ments and reconnect the unit. Talk to your network administrator about reassigning network
drives.
Possible cause
Playback is locked with the security setting turned on.
Corrective action
Cancel the playback lock and connect the unit to the PC with the unit’s power turned on.
Possible cause
The BATTERY SETTING is set to “ALKALINE.”
Corrective action
Set the BATTERY SETTING to “eneloop” (
Possible cause
Connecting the unit to the PC does not cause the battery to be recharged.
Corrective action
Press the Y button for at least two (2) seconds (
).
Possible cause
The attribute of the file is set to “read only.”
Corrective action
Connect the unit to the PC and change the file attribute or erase the file from the PC. Alterna-
tively, format (initialize) the built-in memory.
Possible cause
FAT administration system error.
Corrective action
Format (initialize) the built-in memory.
Corrective action
Press and hold down the FOLDER/INDEX button while the unit is stopped. See
file in the locked S folder” on page 29
.
Possible cause
You attempted to recharge a battery other than the eneloop.
You attempted to recharge the battery, but the battery had not been inserted.
Corrective action
Insert the eneloop battery into the unit.
Possible cause
The unit is overheated.
Corrective action
Disconnect the unit from the PC, let the unit cool down for a while, then try to recharge
again.