Yamaha DG60FX-112 - Manual (Page 23)

23
Utility Mode
The Utility Mode is used for settings that cover the overall system of the DG60FX-112 such as
the foot switch, MIDI, external control, EXP. PEDAL jack, etc.
■ About the Utility Mode
Press the [UTILITY] button to enter the Utility Mode
(the lamp lights).
In the Utility Mode, press the [UTILITY] button to
return to the Play Mode (the lamp is off).
Press the Foot Switch that you want to set (the lamp
lights), and use the [UP]/[DOWN] buttons to set to
one of the following.
• oFF : MIDI data is not transmitted.
• 1 - 32 , 64 - 95 : The control change number
that is to be transmitted.
● Transmitting control change values when the
switch is OFF.
Sets the MIDI control change value that is transmit-
ted when the Foot Switch is switched OFF. (Avail-
able only when the Foot Switch function is set to
“
EFF ”.)
Press the [FLANGER] button to display the value of
the currently selected setting.
Press the Foot Switch you want to set (the lamp
lights), and use the [UP]/[DOWN] buttons to set.
• 0 - 127 : The control change value that is trans-
mitted.
● Transmitting control change values when the
switch is ON.
Sets the MIDI control change number that is trans-
mitted when the Foot Switch is switched ON. (Avail-
able only when the Foot Switch function is set to
“
EFF ”.)
Press the [PHASER] button to display the value of
the currently selected setting.
Press the Foot Switch you want to set (the lamp
lights), and use the [UP]/[DOWN] buttons to set.
• 0 - 127 : The control change value that is trans-
mitted.
In the Utility Mode, MIDI messages cannot be
received. Use the Play Mode to receive MIDI
messages.
In the Utility Mode, it is possible to set the following
six functions. The Amp Select Switch is used to se-
lect the function.
• LEAD1: Foot Switch Functions
• LEAD2: MIDI Functions
• DRIVE1: External Control Settings
• DRIVE2: EXP. Pedal Settings
• CRUNCH1: Wah Pedal Settings
• CRUNCH2: Speaker Simulator Mode
■ Foot Switch Functions
Press the [UTILITY] button and set the amp select
switch to LEAD1 (“
F.S ” will appear).
● Select the Foot Switch function
Press the [COMP] button and use the [UP]/[DOWN]
buttons to set the function of foot switches 1-3.
• PrG : Switch patches with the Foot Switch.
• EFF : Switch the effects ON/OFF with the Foot
Switch.
Switch 1: Modulation Effect
Switch 2: Delay Effect
Switch 3: Reverb Effect
● Transmitting Control Change Numbers.
Sets the MIDI control change number that is trans-
mitted when the foot switch is switched ON/OFF.
(Available only when the Foot Switch function is set
to “
EFF ”.)
Press the [CHORUS] button to display the value of
the currently selected setting.