Yamaha D5000 User Manual
Page 37
104 - MIDI Data format
D5000
3.
Reception Data and Conditions
4.
Reception Data
1) Channel Voice Messages
1 Note Off
Received on the currently set MIDI channel (if set to OMNI, all channels received). When a delay program
is active or a FREEZE program is set to record, the incoming data can be used as a trigger signal. The velocity
value is ignored. Data cannot be received when the BASE KEY parameter is set to OFF.
Status
1001nnnn
(
9nH
)
n = 0 (channel number1) ~ 15 (channel number 16)
Note Number
0kkkkkkk
k = 0 (C-2) ~ 127(G8)
Velocity
0vvvvvvv
v = 0 ~ 127
2 Note On
This message is only effective when the FREEZE program is set to playback
Status
1001nnnn
(9nH)
n = 0 (channel number1) ~ 15 (channel number 16)
Note Number
0kkkkkkk
k = 0 (C-2) ~ 127(G8)
Velocity
0vvvvvvv
v = 0 ~ 127
3 Control Change
Received on the currently set MIDI channel. When a message is received, the value of the assigned effect
parameter is changed according to the control value.
Status
1011nnnn
(
BnH
)
n = 0 (channel number1) ~ 15 (channel number 16)
Control Number
0ccccccc
c = 1 ~ 95
Control Value
0vvvvvvv
v = 0 ~ 127
4 Program Change
Received on the currently set MIDI channel. When a message is received, the corresponding program is
recalled from the program change table of the current bank.
Status
1100nnnn
(
CnH
)
n = 0 (channel number1) ~ 15 (channel number 16)
Program Number
0ppppppp
p = 0 ~ 127
2) System Exclusive Messages
1 Program Bulk Data Request
Received on the currently set MIDI channel. When a message is received, the data for the requested program
number is transmitted.
Status
11110000
(
F0H
)
ID Number
01000011
(
43H
)
Sub Status
0010nnnn
(
2nH
)
n = 0 (channel number1) ~ 15 (channel number 16)
Format Number
01111110
(
7EH
)
01001100
(
4CH
)
ASCII “L”
01001101
(
4DH
)
ASCII “M”
00100000
(
20H
)
ASCII “ ”
00100000
(
20H
)
ASCII “ ”
00111000
(
38H
)
ASCII “8”
01000001
(
41H
)
ASCII “A”
MIDI IN
MIDI
OFF
OMNI
1~ 16
CH = ?
CH
OFF
ON (C1 ~ C6)
BASE KEY
NOTE ON (9nH)
NOTE OFF (8nH)
CONTROL CHANGE (BnH)
PROGRAM CHANGE (CnH)
BULK DUMP REQUEST (F0H,43H,2nH)
BULK DUMP (F0H,43H,0nH)
BANK CHANGE (F0H,43H,0nH)
SYSTEM REAL TIME (F8H)