ZyXEL Communications P-660W-Tx v2 - Manual (Page 10)

P-660W-Tx v2 Quick Start Guide
9
2 Click Wireless.
3 Select Enable Wireless LAN.
4 ESSID: Type the name (up to 32
characters) you want to give to your
wireless network.
5 Channel ID: Change the Channel ID
from the default if interference is a
problem on your network.
6 Security Mode: Select the strongest
Security Mode that devices on your
wireless network support. WPA2-PSK
is a good choice for a home network. In
this screen, select WPA Compatible
and type a Pre-Shared Key using a
combination of letters and numbers
(8~63 characters long). Then click
Apply to save your settings.
"
Write down the Pre-Shared Key and ESSID as you will need to use them
again when you connect your computer to the P-660W-Tx v2.
3.2 Connect to the P-660W-Tx v2 Wirelessly From Your Computer
You can now connect to your P-660W-Tx v2 via a wireless connection, and access the
Internet. You need the ESSID and also the Pre-Shared Key if you set up security in the
previous section. The connection procedure is shown here (using Windows XP as an
example).
1 Right-click the wireless adapter icon which appears in
the bottom right of your computer screen. Click View
Available Wireless Networks.
Write down the Pre-Shared Key!