ZyXEL Communications P-660W-Tx v2 - Manual (Page 11)

P-660W-Tx v2 Quick Start Guide
10
2 Select the ESSID name you gave the P-
660W-Tx v2 and click Connect. (The ESSID
used here is an example.)
3 If you have set up wireless security, you are
prompted to enter a password. Enter the Pre-
Shared Key you set up in the previous section and
click Connect.
4 If you connected successfully, a message similar to the following
displays.
V
If you cannot connect wirelessly to the P-660W-Tx v2, check that you are
using the same ESSID and security key on both the P-660W-Tx v2 and
your wireless client.
5 Congratulations! That completes the setup procedure for your P-660W-Tx v2. Open a
web browser, such as Internet Explorer, to visit your favorite website.
Procedure to View a Product’s Certification(s)
1 Go to www.zyxel.com.
2 Select your product from the drop-down list box on the ZyXEL home
page to go to that product's page.
3 Select the certification you wish to view from this page.