Yamaha CRW4001t - Manual (Page 16)

Chapter 2 - Installing the Yamaha CRW4001t Drive
10
8. Connect the power supply cable.
Connect the +12V and +5V 4-pin power cable to the power supply inter-
face located on the rear panel of the CRW4001t drive.
The shape of the connector makes it impossible to reverse the connections.
DC INPUT I/F
9. Tighten the four fastening screws securely.
R G
L
AUDIO OUT
CSEL
SLAVE
MASTER
SER. NO.
IDE INTERFACE CONNECTOR
1
DC INPUT
+5V G +12V
4 3 2 1
+5V±5% G +12V±10%
DC INPUT