Yamaha CRW4001t - Manual (Page 20)

Chapter 3 - Operation
14
Ejecting the Disc
If the CRW4001t is powered on:
Press the eject button to eject the disc.
Note: You cannot eject the disc if the ATAPI command prohibits the eject opera-
tion while the CRW4001t is reading data.
Caution: Be sure to remove the disc after it is completely ejected. (Trying to
remove the disc before it is completely ejected may cause the drive to
malfunction.)
If the CRW4001t is not powered on:
Pressing the eject button will not eject the disc.
ON/
DISC
VOL
READ/
WRITE
Recordable
Press the eject button