ZyXEL Communications G-202 - Manual (Page 54)

ZyXEL G-202 User’s Guide
54 Chapter 4 Wireless Station Mode Configuration
The following table describes the labels in this screen.
2 If you select the Infrastructure network type in the previous screen, skip to step 3 . If you
select the Ad-Hoc network type in the previous screen, a screen displays as follows.
Select a channel number and wireless LAN mode
and click Next to continue.
Note: To associate to an ad-hoc network, you must use the same channel as the peer
computer.
Table 12 Station Mode: Profile: Add a New Profile
LABEL DESCRIPTION
Add New Profile
Profile Name Enter a descriptive name in this field.
SSID Select an available wireless device in the Scan Info table and click Select, or enter
the SSID of the wireless device to which you want to associate in this field
manually. Otherwise, enter Any to have the G-202 associate to any AP or roam
between any infrastructure wireless networks.
Network Type Select Infrastructure to associate to an AP. Select Ad-Hoc to associate to a peer
computer.
Next Click Next to go to the next screen.
Exit Click Exit to go back to the previous screen without saving.
Scan Info This table displays the information of the available wireless networks within the
transmission range.
,
,
or
denotes that the wireless device is in infrastructure mode and the wireless
security is activated.
denotes that the wireless device is in infrastructure mode but the wireless
security is deactivated.
denotes that the wireless device is in Ad-Hoc mode and the wireless
security is activated.
denotes that the wireless device is in Ad-Hoc mode but the wireless security
is deactivated.
SSID This field displays the SSID (Service Set IDentifier) of each AP or peer device.
Scan Click Scan to search for available wireless devices within transmission range.
Select Select an available wireless device in the table and click Select to add it to this
profile.
Whenever you activate this profile, the G-202 associates to the selected wireless
network only.