ZyXEL Communications G-202 - Manual (Page 55)

ZyXEL G-202 User’s Guide
Chapter 4 Wireless Station Mode Configuration 55
Figure 32 Station Mode: Profile: Select a Channel
The following table describes the labels in this screen.
3 If you select Infrastructure network type in the first screen, select WEP, WPA, WPA2,
WPA-PSK, WPA2-PSK or 802.1x from the drop-down list box to enable data
encryption. If you select Ad-Hoc network type in the first screen, you can only use WEP
encryption method. Otherwise, select DISABLE to allow the G-202 to communicate
with the access points or other peer wireless computers without any data encryption and
skip to step
5 .
Table 13 Station Mode: Profile: Select a Channel
LABEL DESCRIPTION
Wireless Settings
Channel Select a channel number from the drop-down list box. To associate to an ad-hoc
network, you must use the same channel as the peer computer.
Wireless Mode Select Mixed Mode to have the G-202 connect to either an IEEE 802.11g or IEEE
802.11b wireless device.
Select G Only to have the G-202 connect to an IEEE 802.11g wireless device only
and vice versa.
Select B Only to have the G-202 connect to an IEEE 802.11b wireless device only
and vice versa.